ST10PRO ECU Performance Chip With Latest Programming
The fastest & safest way to obtain a highly power tuned ECU.
Safely unlock your vehicle’s potential.
* DashCommand Only Supported On Android Due To Program Limitations – See Below
About the Chip
Get Maximum Performance From your Engine- Safely!
Installs in seconds. Not only will the ST10 compete with other high priced chips and programmers such as JDM and JET, but it will outperform them – at half the cost! Performance Tuning is one of the most popular solutions to unleash hidden HP and Torque from your vehicle. The ST10PRO Performance Chip programmer / tuner is one of the easiest performance chiptuning modules to install on the market, with a simple plug into your OBD2 port. The performance chip downloads real-time data through your OBD2 connection allowing the module to study your driving habits over a period of one to two weeks to optimize the ignition spark advance, air to fuel ratios and transmission shifting for the ultimate in power gains, increasing your throttle response, low end torque and acceleration. Proven to provide better street performance, towing capabilities and response. The performance chip will work with all aftermarket performance products, such as Intakes, exhaust systems, mass air flow sensors, throttle body spacers, etc. The chip is smog legal in 50 states, and will not void any factory warranty. The ST10 is bluetooth enabled, allowing you to monitor your vehicle’s performance in real time.
· Engine output improved by 35% or more.
· Compare to Jet Chip DST($199) or Venom 400 ($300+)
· Enhances throttle response, acceleration and low end torque
· Preserves smog tests – emissions friendly
· Peaks acceleration by up to 40%
· Will not void warranty – completely safe for your engine
· Simple installation – simply plug into OBD2 port
· Removes flat spots from throttle response
· Bluetooth Enabled – allows monitoring vehicle performance in realtime
· Can be used with Torque app and many others
· Compatible with Android and IPhone
Scam Chips Are Everywhere
This is Not a cheap, scam chip like many others. NO RESISTORS or cheap hacks like the competition. This is literally what is inside over 90% of ‘performance modules’ sold online – a .10 cent resistor!
The ST10PRO chip contains a vehicle specific, custom programmed 200MHZ microcontroller. It uses high speed serial input/output to communicate directly with the ECU through the OBD2 port, so there’s no danger of damaging your vehicle! No resistor can do this!
The ST10PRO Performance Chip
– Is a single solution to getting midrange power gains and towing power improvement
– Directly interfaces with your vehicle’s ECU computer in real-time
– Is smart – factors in Oxygen levels in exhaust, engine speed and load, intake air / temperature, volume and many other variables to provide the most efficient tune
– Is compatible with factory equipped Super Chargers, Diesel Engines
– Is Plug and Play!
The ST10PRO Chip delivers results!
Attention: The chip is NOT compatible with Hybrid Engine options, Propane, or Natural Gas
Will it only work with Modded Vehicles?
The chip will work on both modded as well as stock vehicles. The microprocessor will detect engine characteristics via the OBD port and adjust itself accordingly.
What is Stage 3?
The vehicle performance industry recognizes three tuning stages: Stage 1, Stage 2 and Stage 3. Stage 1 is generally for stock vehicles and provides the smallest gains in performance and power. Stage 2 is generally for slightly modded vehicles and provides average performance and power gains. Stage 3 is generally for highly modded vehicles and provides the best performance and power gains. Our modules are backwards compatible, meaning our Stage 3 module will perform at Stage 3, but will reduce the tune to Stage 2 if needed based on the module’s communication with the vehicle. In this way, it operates within the safe ECU limits set forth by the vehicle manufacturer and ensures it cannot cause vehicle damage.
What if my vehicle is Supercharged or Turbocharged?
We usually do not recommend installation with add-on (aftermarket) Turbo-charged models. There is no issue with FACTORY supercharged or turbocharged models.
What if I already have a Power Programmer or Handheld Tuner installed?
No problem. This module will work with all aftermarket power programmers, tuners and OBD2 modules. However, you must have access to your OBD2 port. The product must be plugged in to your OBD2 port at all times in order to function.
What if I have an Automatic or Manual? Does it matter?
The chip is compatible with both Automatic and Manual transmissions.
Will this void my warranty?
No! This module does not cause any damage, unlike most cheap competitors. This product will not void your warranty. The vehicle manufacturer cannot void your vehicle warranty due to aftermarket accessories. The module uses soft-patching technology and is completely safe and reversible. It leaves no footprint and cannot be detected once removed from the vehicle.
Can this Damage my engine?
Since our performance chip module only interfaces with the vehicle computer (ECU), it causes your vehicle’s computer to adjust itself to a more optimal fuel mixture and timing curve. This means you are fully protected by the built in safeguards of your computer. These performance chips have been tested over and over and are proven not to affect your vehicle’s engine or electrical system in any way, unlike cheap resistor scam chips.
Will this chip work on my vehicle?
This is a custom programmed chip for one specific vehicle. Please verify compatibility in the fitment chart before purchase. If in doubt, ask us.
Is this a resistor scam?
No. It connects to your OBD2 port. It interfaces with your ECU, it is not a damaging resistor scam chip.
How much gain can I expect?
Gains vary depending on many variables, but typical gains vary anywhere from 15-25HP or more.
What information is needed to program the chip for my vehicle?
We will need the Make, model and year of your vehicle. (Please send this information at the time of checkout). Please ensure your vehicle is listed in the fitment list before ordering.
What Devices / Apps are supported?
The ST10 module currently supports both android and iphone devices. However, the Dashcommand app on iphone is not supported on newer iphones due to program limitations. The ST10 uses a Bluetooth v4.0 adapter which is compatible with iphone, but some iphone apps only support wifi devices. This is a limitation in the iphone design and not the ST10. Most other apps such as Torque, Virtual Dyno, Car Scanner ELM OBD2 and others are supported. Most apps compatible with ELM327 bluetooth readers are compatible with the ST10.
Fitment for most of the following models:
Acura, Alfa Romeo, Audi, BMW, Buick, Cadillac, Chevy, Chrysler, Citroen, Daewoo, Dodge, Eagle, Fiat, Ford, Geo, GMW, Holden, Honda, Hummer, Hyundai, Infiniti, Isuzu, Jaguar, Jeep, Kia, Land Rover, Lexus, Lincoln, Mazda, Mercedes, Mercury, Mini, Mitrubishi, Nissan, Oldsmobile, Opel, Peugeot, Plymouth, Pontiac, Porsche, Renault, Saab, Saturn, Scion, Subaru, Suzuki, Toyota, Volvo, Volkswagen (VW).
Most DIESEL vehicles are also supported.